Had similar problem caused by aftermarket distributor cap. Put in a Lucas and
no problems since.
Also, could be plug wires (esp. if you've got a 'stock' distributor cap and
you're not using stranded wire plug wires).
Could also be the little, fragile ground strap for the points inside the
distributor.
Bob
--------------------------------
Bob Spidell - San Jose, CA
----- Original Message -----
From: "frank yow" <frankyow_99 at yahoo.com>
To: "healey" <healeys at autox.team.net>
Sent: Thursday, September 1, 2011 2:13:56 PM
Subject: [Healeys] problem with BT7
Hi Healeyphiles, I have a problem, seek advice. Have a miss developing after
running 35 to 40 minutes, Have had distributor rebuilt, new plugs good (epoxy)
rotor, have swapped several coils to no effect, I have an SU and an electronic
pump, switchable, no improvement have inline filter, shows nothing, nothing
seems to improve situation, carb floats OK, have tried all I can think of, any
advice? Frank Yow, BT7 (61)
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at
comcast.net
|