I'm wondering if the clutch hydraulics were holding pressure on the bearing?
Or, maybe there's a bad batch of graphite bearings out there.
Bob
On 9/16/2011 1:53 PM, Frank wrote:
> I think there was a modern replacement available when I replaced the one on my
> MGB many years ago. It might be worth searching to find a bearing that has
> moving parts as opposed to the graphite type.
>
> Hope this helps,
> Frank
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at
> comcast.net
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell at comcast.net
*******************************************************************
|