I have one but can not for the life of me remember where I got it. Severe
CRS. Give me a day or two while I try to clear the cobwebs from my brain.
John Sims, BN6
Aberdeen, NJ
http://www.healey6.com
-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at
autox.team.net]
On Behalf Of john spaur
Sent: Saturday, March 03, 2012 4:32 PM
To: Eberhard Pietzsch
Cc: healeys at autox.team.net
Subject: Re: [Healeys] 2.3/16 wrench
There is someone that sells one made from square tubing with a socket welded
to it. It is boxed shaped so it only rests on four of the nut flats. It
works but is not the best fit. I tried to access the archives to see if I
could find an email from the person that I bought mine from but the server
appears to be down.
Remember that the nuts are left and right handed.
John
At 09:48 PM 3/3/2012 +0100, you wrote:
>Hello,
>
>I am trying to dismantle the rear axle of my BN6. So I need some wrench
>of size 2 3/16" (about 55.5 mm). I think this really is the right size
>of the large nut in the center of the break housing. It has to be
>8-point.
>
>Can someone help my in finding such a wrench? I already searched in
>online shops for workshop equipment but I did only find 12-point
>wrenches which shouldn't fit.
>
>Perhaps there also is an alternative tool to undo the nut.
>
>Thanks,
>Eberhard
>
>
>--
>Eberhard Pietzsch
>Tuebingen, Germany
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html Suggested annual
>donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>Healeys at autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/jmsdarch at sbcglobal.net
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ahbn6 at verizon.net
|