Off the top of my head - 1-1/8" torqued to 45 ft lbs plus maybe a little bit
more to get the cotter pin holes to line up.
Richard Mayor
BN7L-466 Vintage Racer
Portland, Oregon
> Date: Mon, 16 Apr 2012 17:54:18 -0400
> From: edic at tampabay.rr.com
> To: Healeys at autox.team.net
> Subject: [Healeys] Front suspension BJ8
>
> Listers- I need to know the size of the front hub retaining nut as I as re
> greasing my bearings and will need to purchase the correct socket. Thanks
in
> advance and you can respond off list to me.
>
> Happy Healeying,
>
> Mel Brunet
> HBJ8L/39749
> Land O Lakes, FL
>
> [demime 1.01d removed an attachment of type image/jpeg which had a name of
untitled-1.jpg]
>
> [demime 1.01d removed an attachment of type image/gif which had a name of
butterflies3_hyper+btn.gif]
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mayorrichard at hotmail.com
|