healeys
[Top] [All Lists]

[Healeys] Oil plug washer

Subject: [Healeys] Oil plug washer
From: RonFineEsq at earthlink.net (Ron Fine)
Date: Fri, 27 Apr 2012 16:07:50 -0700
References: <7F5F48D4B6B0496FA5B347D6FFB4E026@XPS400> <1832872877.1488924.1335549796219.JavaMail.root@sz0054a.emeryville.ca.mail.comcast.net> <6.2.3.4.2.20120427113716.020dbd80@pop.att.yahoo.com>
Thanks.   My only existing plug is on my car.  I hate to lose all my fresh 
oil.  I did try to anneal the existing washer without much success.  That's 
why I am going to try to do a quick switch with my finger in the dike so to 
speak.

Ron
----- Original Message ----- 
From: "john spaur" <jmsdarch at sbcglobal.net>
To: "Ron Fine" <RonFineEsq at earthlink.net>
Cc: <healeys at autox.team.net>
Sent: Friday, April 27, 2012 11:41 AM
Subject: Re: [Healeys] Oil plug washer


> 25/32" ID, 1-3/32 OD, .06 thick. Take your plug down to the hardware 
> store.
>
> John
>
> At 06:03 PM 4/27/2012 +0000, Bob Spidell wrote:
>>I think it's 3/4" ID (hopefully, someone can un/confirm).
>>
>>Or, you can just anneal the one you have: heat it to 'cherry red' with a 
>>propane torch and let cool. Will seal as good as new.
>>
>>
>>Bob
>>
>>
>>--------------------------------
>>Bob Spidell - San Jose, CA
>>
>>----- Original Message -----
>>
>>
>>Can someone give me the dimensions for the copper washer used to seal the 
>>oil
>>drain plug on BN7? I need a new one and don't have time to order from 
>>Moss.
>>I assume I can get one of the proper size locally.
>>
>>Thanks,
>>
>>Ron Fine
>>_______________________________________________
>>Support Team.Net http://www.team.net/donate.html
>>Suggested annual donation  $12.75
>>Archive: http://www.team.net/archive
>>Forums: http://www.team.net/forums
>>
>>Healeys at autox.team.net
>>http://autox.team.net/mailman/listinfo/healeys
>>
>>Unsubscribe/Manage: 
>>http://autox.team.net/mailman/options/healeys/jmsdarch at sbcglobal.net

<Prev in Thread] Current Thread [Next in Thread>