healeys
[Top] [All Lists]

[Healeys] Temp Gauge

Subject: [Healeys] Temp Gauge
From: tahoehealey at hotmail.com (Richard Kahn)
Date: Sun, 27 May 2012 07:22:18 -0700
References: <771613148.884585.1338124983509.JavaMail.root@sz0054a.emeryville.ca.mail.comcast.net>
You should check the temp with an infrared gun (Harbor Freight for 30 or so
bucks). Aim at the thermostat housing. Then if you still feel it is off,
remove the sensor and see if there is crud around it. I cannot think of
anything that would cause the needle to have moved. If you don't want to get
an infrared, I can bring one at the next Healey event we both attend. Let me
know where you are headed and I'll let you know if I'm going.
Rich Kahn
So. Lake Tahoe

> Date: Sun, 27 May 2012 13:23:03 +0000
> From: bspidell at comcast.net
> To: healeys at autox.team.net
> Subject: [Healeys] Temp Gauge
>
> My temp gauge has lost calibration; it indicates 160deg when it should read
180 (I tried a different thermostat with no change). Otherwise, it seems to be
working (but reading 20deg low).
>
> Can the indicator needle be pulled (carefully) off and (re) set to give
correct temperature?
>
> TIA,
> Bob
>
>
> --------------------------------
> Bob Spidell - San Jose, CA
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/tahoehealey at hotmail.com

<Prev in Thread] Current Thread [Next in Thread>