Hi Jeff,
I would suggest that you check that grease is getting to the thrust
bearing, at the top of the swivel axle when the upper king pin bush is
being lubricated.
If either upper king pin bush is installed incorrectly the grease way
(groove in the inner bush surface) may direct grease away from the trust
bearing rather than forcing grease into it.
Over time the thrust bearing will become dry and steering effort will
increase significantly.
--
Michael Salter
*I have BJ8 water pump kits!!*
On Sun, May 27, 2012 at 6:05 PM, Jeff Pelletier <jeff at pellfam.com> wrote:
> My 100-6 steering seem very hard to maneuver lately. ..
>
> up on the lift .it seems to move easily and smoothly.. any ideas.
>
>
>
> jp
> _______________________________________________
|