healeys
[Top] [All Lists]

[Healeys] ingnition leads

Subject: [Healeys] ingnition leads
From: coudesluijs at chello.nl (Oudesluys)
Date: Thu, 31 May 2012 16:08:44 +0200
References: <C391FF5D0336084989C36BE5295EE14C61D21C@MBX028-W1-CA-5.exch028.domain.local>
That is absolute bullshit. Electricity travels with the speed of light, 
around 200.000mls/s. If you have carbon core resistor wires it is 
preferable but not necessary that the wires are of equal length because 
the resistance of each wire will be the same although it is not 
critical. With copper core wires without  measurable resistance there is 
no reason why they should be of equal length.
Kees Oudesluijs
NL

Op 31-5-2012 15:07, Ed O'Neal schreef:
> Just a tidbit of info from the WFS Garage.  Each spark plug ingnition lead
> should be of the same length so that the time for the spark to travel from the
> distributor to the spark plug will be the same for each cylinder.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs 
> at chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2012.0.1913 / Virusdatabase: 2425/5034 - datum van uitgifte: 05/30/12
>
>


-- 
Kees Oudesluijs
Dorpsstraat 183
2995XG Heerjansdam
T: 078-677 1233
E: coudesluijs at chello.nl

Technische commissie Jensen Healey en GT
Het Jensen Genootschap Holland
www.jensenholland.nl

<Prev in Thread] Current Thread [Next in Thread>