Re: [Healeys] water pump bearings

[john spaur <jmsdarch@sbcglobal.net>]

Hi Chris,
I broke the impeller, years ago, when I tried to take the pulley off. 
However, the shaft is in really bad shape due to rust; seal must have 
leaked for a long time. Thanks for the tips.
John

At 12:08 PM 5/30/2012 +1000, Chris Dimmock wrote:
> Hi John,
> I sent you a pic separately. the bearing and shaft are one piece on 
> a bj8 pump.
> Just rebuilt mine.
> Biggest issues are you really need a press to get the brg out of the 
> housing, and a press to get the impeller off the brg. You can 
> improvise with a vice, but you run the risk of breaking the 
> impeller. And usually, the back of the impeller needs to be cleaned 
> up on a lathe where the seal goes.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net