healeys
[Top] [All Lists]

Re: [Healeys] fitting size for brake reservoir?

To: "'Michael Salter'" <michael.salter@gmail.com>
Subject: Re: [Healeys] fitting size for brake reservoir?
From: "Tadeusz Malkiewicz" <Tadeusz.Malkiewicz@plusnet.pl>
Date: Sat, 29 Sep 2012 16:39:06 +0200
Cc: healeys@autox.team.net
Delivered-to: healeys-archive@autox.team.net
Delivered-to: healeys@autox.team.net
References: <!&!AAAAAAAAAAAYAAAAAAAAAJYYKjd9lcJLlEkfUEgCZh/CgAAAEAAAALNZ+n2jqEtBn7pJ3gyJTvIBAAAAAA==@plusnet.pl> <1095414765140108108@unknownmsgid>
Thread-index: AQKwxoXVDesZSsWv5JvtmMjN7w138AJnxRj1lcfVDlA=
Hello Michael,

Is it the same as on the reservoir??..

Best, Tadek

-----Original Message-----
From: Michael Salter [mailto:michael.salter@gmail.com] 
Sent: Saturday, September 29, 2012 3:39 PM
To: Tadeusz Malkiewicz
Cc: healeys@autox.team.net
Subject: Re: [Healeys] fitting size for brake reservoir?

Taseusz,
I'm fairly sure that the line fittings on the original Girling servos are
both 3/8" x 24 UNF with 7/16" across the flats.

Michael S

On 2012-09-29, at 4:23 AM, Tadeusz Malkiewicz
<Tadeusz.Malkiewicz@plusnet.pl> wrote:

> I  have a quick question: what's the fitting size for brake reservoir?
> Anyone knows the size of the top of their head?
>
>
>
> Tadek
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual 
> donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys



<Prev in Thread] Current Thread [Next in Thread>