healeys
[Top] [All Lists]

Re: [Healeys] Threadlocking Armstrong Shock Bolts

To: "'Bob Spidell'" <bspidell@comcast.net>, "'Michael Hartfield'" <hartfiel@alumni.princeton.edu>
Subject: Re: [Healeys] Threadlocking Armstrong Shock Bolts
From: "Larry Varley" <varley@cosmos.net.au>
Date: Tue, 4 Dec 2012 15:49:20 +1100
Cc: healeys@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <CCE279E6.618E%hartfiel@alumni.princeton.edu> <50BD4BA6.6070203@comcast.net>
Thread-index: AQL1a+h26N5SbEEqhMv0xjrq7I2HnQFduP5jla3u1RA=
Bob is right on the money here, I made up 3mm thick washers full diameter of
the spot face on the shocker flange, and never had a problem. The alloy
shock body tends to squash and the bolts come loose, spreading the load on a
larger diameter stops the problem
Cheers
Larry Varley
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>