Re: [Healeys] BN1 and BN2 front fenders - check me on this please.

[Michael MacLean <rrengineer.mike@att.net>]

Easiest way is to look at the chrome spears behind the wheel opening.  On the
BN1 the spear points over the opening radius.  On the BN2 the spear points
below the top of the radius.  Don't forget, some BN2s had BN1 fenders. 
Mike MacLean
56 BN2
60 AN5

--- On Thu, 2/28/13, fiat500f@aol.com <fiat500f@aol.com> wrote:
I need to check something.  With the 100-4, there are the BN1 front fenders,
and the BN2 front fenders.  The easiest (only?) way to tell them apart is to
measure the distance from the top of the wheel opening to the top of the
fender.  Here is the Austin Healey service note about it.
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys