healeys
[Top] [All Lists]

[Healeys] Front disc conversion - followup thoughts

To: Chris Dimmock <austin.healey@gmail.com>
Subject: [Healeys] Front disc conversion - followup thoughts
From: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Thu, 07 Mar 2013 06:00:25 -0800
Cc: healeys@autox.team.net <healeys@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <004101ce1ad2$cc90f770$65b2e650$@com> <2992F690-FB1C-4DC8-8624-A987B16E33BB@gmail.com>
My car had a .75" master cylinder which I'm using.

I bought one of the Lockheed boosters but have not installed it. With the 
ceramic pads it is not necessary - the pedal effort is no greater than the 
drums were. Pedal is rock-hard and very direct. The stainless hoses seem to 
make a slight improvement as my rubber hoses were new.

I was inspired by the Triumph article and the ease-of-sourcing on the internet.

HealeyRick on this list has informed me that Welch is making a 3.5" adapter 
plate for older cars. This would cut the cost by quite a bit as well as 
increasing availability over the unobtainium BJ8 swivel axles.


-- 
Steve Gerow
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] Front disc conversion - followup thoughts, Steve B. Gerow <=