healeys
[Top] [All Lists]

Re: [Healeys] blue "piping"

To: Simon Lachlan <simon.lachlan@homecall.co.uk>
Subject: Re: [Healeys] blue "piping"
From: I Erbs <eyera3000@gmail.com>
Date: Tue, 21 May 2013 08:33:01 -0700
Cc: healeys@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <20130521074325.5EICL.47015.root@pamxwww09-z01> <519b7f2a.48d9440a.3f08.ffffe2daSMTPIN_ADDED_BROKEN@mx.google.com>
If you can get  the material, I use the nylon whips for a weed eater and
roll the material over it. contact cement works great. If you can stitch it
too, that's better. I needed to make the piping at the edge of my dash top
on my BT7
Ira Erbs
Portland, OR
   _______                                  _______
     (______ \____1960 BT7____/ _______)
         (_________________________)


On Tue, May 21, 2013 at 7:04 AM, Simon Lachlan <simon.lachlan@homecall.co.uk
> wrote:

> Over here I don't think that stuff comes off the shelf readymade, if you
> see
> what I mean. I've gone to upholsterers and asked for it and they say,
> "Well,
> there are so many colours that I can't keep the right ones. But, show me
> the
> colour from my stash of material or yours and I'll make you up a length
> right now." They take a strip of the appropriate stuff, place a thin
> nylon(?) round length inside it and stitch it up tight along its length.
> Takes them not time at all. Handy too as you can stipulate how wide you
> need
> the surplus material to be....desired width depending on where and how
> it'll
> be placed in the car. I find that the stuff around that finishing plate
> under the door lock needs to be quite wide. (Start wide and reduce. Other
> way round doesn't happen!)
> Simon
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:
> healeys-bounces@autox.team.net]
> On Behalf Of Tom Felts
> Sent: 21 May 2013 12:43
> To: healeys@autox.team.net
> Subject: [Healeys] blue "piping"
>
> I have lost the piping strip (blue) that you fit between the console and
> the
> dash on a BJ8----would anyone happen to have a piece lying around you don't
> need?
>
> Thanks
> tom
> $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/simon.lachlan@homecall.co.uk
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>