Sounds like your cable just needs adjustment. There should be a turnbuckle
near the right rear wheel. Also, there's a
pivot for the two shafts that should be greased regularly.
Bob
On 5/31/2013 6:52 PM, Greg Mandas wrote:
> Team.
>
> Any problems, issues, warnings, suggestions about turning the rear drums on a
> Early Phase II BJ8? Any recommendations for a shop in Southern Connecticut?
>
> As I spin the rears while adjusting the brakes the drums drag for half a
> rotation and free up. Both sides. I'm guessing they need turning. (?)
>
> I'm thinking this is why I can't get the E-Brake to engage with any
> authority. Since I can't adjust the rear shoes close enough and the E-Brake
> doesn't have "That" much travel, they barely engage with the handle straight
> up.
>
> It would work if the thumb release had another tooth or two on which to grip.
>
> Greg
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/bspidell@comcast.net
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|