That would be a safety issue. Long time ago a friend of mine was working on his
racing go-cart and spinning a dry bearing with the air hose. It blew apart and
he lost his left eye. It is now made of glass. I learned my lesson from him.
Safety First!!!
Rusty Lesher
Adventure Limousine
484-638-2110
----- Original Message -----
From: "Bob" <robertlarson@att.net>
To: "Bob Spidell" <bspidell@comcast.net>, "Healey List"
<healeys@autox.team.net>
Sent: Tuesday, September 3, 2013 12:05:44 PM
Subject: Re: [Healeys] Bearing Cleaning
I've heard this for years and don't do it. But it is blind acceptance of the
advise. I've never found an acceptable explanation as to why. Anybody have one?
Bob
On 9/3/2013 10:19 AM, Bob Spidell wrote:
>
>
> Probably not necessary to mention to this crowd, but it's not a good idea to
> spin (rotate) dry bearings (i.e. using a blast of air).
>
> Bob
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|