Not sure about a BJ8 but I used lock nuts on my BT7
John
At 03:18 PM 11/4/2013 -0800, Richard Kahn wrote:
>I read sometime ago about using Allen head bolts to hold the rear shocks on a
>BJ8 as it is near impossible to get tools into the tight areas. As I am again
>experiencing loosening nuts, I would like to do something different. Anyone
>else having trouble with loosening shocks. I have hardened washer and lock
>wishers and two nuts on each bolts. I'm wondering if the bolts are stretching
>(really only one has loosened). Would stainless be less likely to stretch?
>Rich Kahn
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>Healeys@autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|