Thanks Larry, they came loose as advertised.
Now to figure out how to get the bush out without taking anything else off.
Price Lindsay
67 BJ8
Sent from my iPhone
> On Jul 8, 2014, at 2:18 PM, Larry Wendland <bighealey3k@aim.com> wrote:
>
> Price, Use a heavy hammer to strike the opposite end of a box end wrench
with heavy blows. The box end being on the bolt head of course. The shock of
the blow should loosen the bolts. Have done this many times on hard to loosen
bolts on objects that are not anchored securely.
>
> Larry
> '67 BJ8
>
>
> -----Original Message-----
> From: Price Lindsay <050.rpl@gmail.com>
> To: Healey List <healeys@autox.team.net>
> Sent: Tue, Jul 8, 2014 2:08 pm
> Subject: [Healeys] Ring Gear/Flywheel Removal
>
>
> I am changing my clutch assembly and having trouble getting the flywheel
> assembly off to access the Spigot/Pilot bushing which I want to replace.
The
> flywheel turns and won't let me loosen the 4 bolts. (I don't have access to
> pneumatic tools which would probably do the trick.)
>
> Any suggestions?
>
> Price Lindsay
> 67 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/bighealey3k@aim.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|