Mike try running it up without the operating valve, ball, spring and cap in
place.
A good volume of oil should spill out of the hole.
That will prove the pump.
The next step is to do a pressure test.
Michael S
BN1 #174
-----Original Message-----
From: "Mike Tobin" <ahbt71@gmail.com>
Sent: b8/b4/b2014 6:49 AM
To: "healeys@autox.team.net" <healeys@autox.team.net>
Subject: [Healeys] OD Bench Test Fail
Finally got the transmission back together and mated to the OD. Spun them
up on test jig and got zero oil pressure. Electrics work fine, but I'm
not getting any reading at all on the pressure .gauge. I'm pretty sure
the plunger is riding on the cam (I heard it click into place when I
removed the string). I'd rebuild the OD some years ago and it's been
sitting patiently waiting for me to get back to it.
Any suggestions before I go and dismantle the whole ting again?
Cheers,
Mike Tobin
Pepperell, MA
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|