Re: [Healeys] triple carbs

[Wilko2 <e-wilkins@cox.net>]

I'm using HD6 (maybe HD8) and the carb bodies are larger on the underside. 

In this case, thicker gaskets actually help!



On Sep 3, 2014, at 1:55 AM, pmeyer610@tubeo.eu wrote:

> The problem is probably the thickness of the isolator flanges. I have 
> similar issues with my HS4 tricarbs on my LHD. I mounted my carbs 
> without isolating flanges. There is about 10mm spaces betwwen the carb 
> and the steering column.
> Now I will try using 6mm flanges. It should solve the problem, I will 
> use phenolic paper based flanges
> 
> best regards (Bt7 tricarb)
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys