healeys
[Top] [All Lists]

Re: [Healeys] Pressure plate

To: "'R Phillips'" <healeydriver1@gmail.com>, "'healeylist'" <healeys@autox.team.net>
Subject: Re: [Healeys] Pressure plate
From: "John" <jmsdarch@sbcglobal.net>
Date: Sun, 23 Nov 2014 11:26:27 -0800
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=sbcglobal.net; b=Ktfjg2fkAFnU6F6xPX7HwSW5VTcSQU0H8MmuPmNvXy7yOxFcOKFB9kQKRfRBG/hYUxyoYVe5kk0WSwRsCs5wQZlUc/hQKcAvyzPpQ8ycBGiA+8J6AUP955pMuMEtW/O4fJ/0qWvfWW5vddvBWj2ClRJDje25P0+SlnYiolk96q8=;
References: <CAHx2=qBH1vLC5xhS4003pxZ0gheZ0Ekoh+4fC-R68Z2Bepexfg@mail.gmail.com>
Thread-index: AQI5yCYnt7XoTvv0dZfopcWQ/Zu0e5ubFe6A
You can make one out of sheet metal but. You will have to create a die and
use a ballpeen hammer to pound the domed part then drill the hole and file
it to the final round shape. Sounds harder than it will be.

John

-----Original Message-----
From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of R
Phillips
Sent: Sunday, November 23, 2014 7:41 AM
To: healeylist
Subject: [Healeys] Pressure plate

Hello listers,

I'm in immediate need of an oil filter pressure plate listed as part number
42 in the Moss Motors catalogue for the Tecalemit (late) filter.

Any help would be greatly appreciated.

Thanks,

Ric
BJ8
$12.75
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>