OK, thank for all the advice re. tools. Someone did send the required
dimensions so all is well.
It occurred to me that one might forget about all these tools and dimensions
if one were able to weld(?) a biggish nut onto the brass drain plug????
Of course, "brass" is the key word. Is it brass in fact? And can it be
welded? A quick Google suggests brazing/silver solder.......
Plastic Metal as, I think, we call it or JB Weld would be worth a try? If it
failed, one would be no worse off...
Simon
-----Original Message-----
From: Healey Bruce [mailto:healeybruce@roadrunner.com]
Sent: 17 December 2014 01:09
To: 'Charlie'; 'Simon Lachlan'
Cc: healeys@autox.team.net
Subject: RE: [Healeys] OD drain plug dimensions
I have the socket-like tool from the British Tool Company as well. It works
OK, but it can slip off. I put a small floor jack under the socket wrench
to keep it engaged while breaking it loose.
Bruce
Brea, CA
1960 BN7
-----Original Message-----
From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of Charlie
Sent: Tuesday, December 16, 2014 8:06 AM
To: Simon Lachlan
Cc: healeys@autox.team.net
Subject: Re: [Healeys] OD drain plug dimensions
I got mine from this guy:
https://www.facebook.com/pages/British-Tool-Company/121629271210814
I think his is the one that Moss carries.
----- Original Message -----
From: "Simon Lachlan" <simon.lachlan@homecall.co.uk>
To: "Richard Kahn" <tahoehealey@hotmail.com>
Cc: healeys@autox.team.net
Sent: Tuesday, December 16, 2014 10:36:16 AM
Subject: Re: [Healeys] OD drain plug dimensions
The plug size..............please, just the plug size.
Simon
From: Richard Kahn [mailto:tahoehealey@hotmail.com]
Sent: 16 December 2014 15:03
To: Simon Lachlan
Subject: RE: [Healeys] OD drain plug dimensions
I got mine from British Car Specialist years ago. I believe Moss carries one
also.
Rich Kahn
> From: simon.lachlan@homecall.co.uk
> To: healeys@autox.team.net
> Date: Tue, 16 Dec 2014 14:46:05 +0000
> Subject: [Healeys] OD drain plug dimensions
>
> Thank you everyone for your suggestions.
>
> Does anyone have the dimensions per my original request? That is all
> that
I
> need.
>
> Simon
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html Suggested annual
> donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/tahoehealey@hotmail.com
$12.75
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/mgcharlie@comcast.net
$12.75
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/healeybruce@roadrunner.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|