healeys
[Top] [All Lists]

Re: [Healeys] Fan

To: "BJ8Healeys" <sbyers@ec.rr.com>, <healeys@autox.team.net>
Subject: Re: [Healeys] Fan
From: "Roger Grace" <roggrace@telus.net>
Date: Tue, 30 Dec 2014 13:13:04 -0800
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
Importance: Normal
References: <54a28211.8a4f320a.27f8.6b94SMTPIN_ADDED_BROKEN@mx.google.com> <CACPMnYpmG-BPVYsYz=gHLtf_093gdK1_nJoi8hf8-WSKgYHNig@mail.gmail.com> <54a2ec5f.0767b40a.4c18.ffffc582SMTPIN_ADDED_BROKEN@mx.google.com> <CACPMnYrNL4JE85BNfGP1KJfXEtTyqOmPJmiGY8Jh_7isGX62Cw@mail.gmail.com> <00f301d02463$dd799780$986cc680$@com> <54A30278.3050902@comcast.net> <039001d02473$43a54d10$caefe730$@rr.com>
I have a yellow, metal, 6 blade fan fitted to my car; origin and age unknown 
but suspect was fitted around 2004; just wondering if there are any tell 
tale signs to help identify it as one one the Moss/China culprits ??
rg

-----Original Message----- 
From: BJ8Healeys
Sent: Tuesday, December 30, 2014 12:57 PM
To: healeys@autox.team.net
Subject: Re: [Healeys] Fan

I've heard that some see movement of the blade tips, but mine doesn't move
any detectable amount even at high revs.  I have a Texas Kooler that I
bought from the North Texas AHC in November 2000 when they used it as a fund
raiser ("Texas Kooler" was their name for it).  I understood at that time
that the fan was actually manufactured by Hayden.  Maybe the later similar
fans are another example of finding "better", cheaper ways to manufacture
them in China.
I know that Moss had some problems with fatigue failures with their metal
six-blade fans (also made in China).  One of them shed two blades in my car,
put a 2" gash in the radiator header tank, and was only prevented from doing
the same to my bonnet by the homemade fan shroud that I had installed
(attached to the fan guard and at the sides riveted to the radiator frame).
Did Moss really have trouble with failures of their plastic fan?

Steve Byers
HBJ8L/36666
BJ8 Registry
AHCA Delegate at Large
Havelock, NC  USA


-----Original Message-----
From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of Bob
Spidell
Sent: Tuesday, December 30, 2014 2:52 PM
To: healeys@autox.team.net
Subject: Re: [Healeys] Fan

The one I have moves forward at the tips about 1/4" at high revs (kinda hard
to measure exactly).

Bob



On 12/30/2014 11:07 AM, Andy wrote:
>
> How much does it flex?
>
>



_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

http://autox.team.net/mailman/options/healeys/roggrace@telus.net

_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>