Ball/needle/roller bearings can only spin when the there is debris
inside the bearing from e.g. a broken cage, balls/needles/rollers, diff
that block the bearing causing the outer cage to turn. This happens
mainly because people drive there cars until the bearing starts to break
up, well into or beyond the rumbling stage.
Kees Oudesluijs
healeymanjim schreef op 31-1-2015 om 4:32:
> I have changed many seals and have always had to drive out the bearing with a
> brass drift and drive it back in. cannot imagine it spinning inside, but I
> have been wrong many times.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2015.0.5646 / Virusdatabase: 4273/9024 - datum van uitgifte: 01/30/15
>
>
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|