Did it pull the chrome piece off of the glass? If so, the windshield might
be thinner glass than others or the rubber gasket may not be thick enough.
If it pulled the bow up the aluminum trim piece on the bow may not be over
the edge of the windshield enough to engage and grip it.
John
'62 BT7
-----Original Message-----
From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of Charlie
Schott
Sent: Wednesday, April 13, 2016 5:35 PM
To: Chris Dimmock <austin.healey@gmail.com>
Cc: Steve B. Gerow <steveg@abrazosdata.com>; healeys@autox.team.net
Subject: Re: [Healeys] Installing soft top
I'm installing the soft top on my 1960 BT7. Before stretching the top to the
header board, I clamped the header board to the windshield, but it pulled up
in the center. If I stretch the top to it, it will pull away even further.
Does anyone know what causes this and how can I fix it? Thanks.
Regards,
Charlie
_______________________________________________
$12.75
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|