healeys
[Top] [All Lists]

[Healeys] Re Coventry radiator badge

To: healeys@autox.team.net
Subject: [Healeys] Re Coventry radiator badge
From: carroll phillips <bjcap@optonline.net>
Date: Mon, 20 Jun 2016 18:46:02 -0400 (EDT)
Authentication-results: mta2.srv.hcvlny.cv.net smtp.user=bjcap; auth=pass (LOGIN) a=LwqVbtzhEDZ78bDGvM6NfQ==:117 a=LwqVbtzhEDZ78bDGvM6NfQ==:17 a=L9H7d07YOLsA:10 a=9cW_t1CCXrUA:10 a=s5jvgZ67dGcA:10 a=+GGgEctla0Atsv6V580Pc7StXZc=:19 a=gB-qy2ADRQwA:10 a=pD_ry4oyNxEA:10 a=YTd00OOgvn1IQlnjGf8A:9 a=QEXdDO2ut3YA:10 a=fieWTxyuaVG96TWsCrAA:9
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
User-agent: Laszlo Mail 3
--===============0915444171574710331==
        boundary="----=_Part_1889203_1546231890.1466462762886"

------=_Part_1889203_1546231890.1466462762886
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Chris,
Be glad you still have one , The badges were installed as a bare steel 
stamping with just a little lead to the rad. Water gets behind the plate 
and rusts it out , protected by the black paint on the outside but not 
from behind. What I did with mine was gently and gently wire brush to 
get some of the surface rust off, use some rustoleum rusty primer and 
spray it to the masked off plate. It will help seal the surface, also 
something like rust mort will work, see if you can get it behind the 
plate too. Anything to protect it when the rad is cleaned. Ive heated 
them off before but if there is enough rust present it can be damaged 
even more ( rust thru holes)I would get it sealed up and then paint it 
all together as original was. Dont over paint or use a brush, just 
enough to help blend the rust a little smoother.
Carroll

------=_Part_1889203_1546231890.1466462762886
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Chris,<br><br>Be glad you still have one , The badges were installed as a bare 
steel stamping with just a little lead to the rad. Water gets behind the plate 
and rusts it out , protected by the black paint on the outside but not from 
behind. What I did with mine was gently and gently wire brush to get some of 
the surface rust off, use some rustoleum rusty primer and spray it to the 
masked off plate. It will help seal the surface, also something like rust mort 
will work, see if you can get it behind the plate too. Anything to protect it 
when the rad is cleaned. Ive heated them off before but if there is enough rust 
present it can be damaged even more ( rust thru holes)I would get it sealed up 
and then paint it all together as original was. Dont over paint or use a brush, 
just enough to help blend the rust a little smoother.<br>Carroll<br>
------=_Part_1889203_1546231890.1466462762886--

--===============0915444171574710331==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys



--===============0915444171574710331==--

<Prev in Thread] Current Thread [Next in Thread>