healeys
[Top] [All Lists]

[Healeys] Belleville washers in BN2 steering box

Subject: [Healeys] Belleville washers in BN2 steering box
From: simon.lachlan at homecall.co.uk (Simon Lachlan)
Date: Sat, 14 Jan 2017 10:44:48 -0000
References: <5c4d20a5-d2ec-b119-8b67-e3a3923683eb@comcast.net> <001501d26b8e$fc7f3990$f57dacb0$@hunterbane.com> <3bcd1b68-3f2d-077b-07a7-1501c1ea4f7d@comcast.net> <CAHZDnjp-7BTQYPp0yB3vg2FweQOwoJfu=nmLH2rXig2TapxN8Q@mail.gmail.com> <CABXhz89gZLrdAMkrQ6RbfbzTpzdADxSu5UE1P2kmJioJ9z2WFA@mail.gmail.com>
Hi,

Try someone like this:-

https://www.parcel2go.com/

ie make your own shipping arrangements via a courier of your own choosing. I 
use people off this site quite often when I think I?m about to be ripped off on 
P&P.

I just got a quote for a spoof package: 500mmH X 300mmL X 200mmH at 9kilo. Pick 
up UK, delivered USA, including ?Protection?(?). 4 days+ ETA.

?120:00 delivery to the US at a ?Take it or Leave it; we really don?t give a 
stuff? rate is appalling. Unless it includes a huge amount of import dues. But 
I imagine that those iniquities are handled separately in the US, just like 
they are here?

Simon

 

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs
Sent: 13 January 2017 19:27
To: Neil Anderson
Cc: Healeys
Subject: Re: [Healeys] Belleville washers in BN2 steering box

 

I wanted to buy a luggage rack from England, They wanted 248 BPS for the rack 
and 125 BPS to ship. I told them to find a cheaper way to ship or I would not 
buy the rack. They told me too bad that was what it cost to ship. Other 
suppliers have been willing to find a cheaper way to ship when I asked...

But no VAT applied :)




Ira Erbs

Portland,OR

      _______                                  _______
     (______ \____1959 BN4____/ _______)
         (_________________________)

          BT7 engine and disk brakes

 

A racing car is an animal with a thousand adjustments. Mario Andretti

Please excuse random auto corrects and misspelled words

 

On Fri, Jan 13, 2017 at 7:27 AM, Neil Anderson <neilandcustom at gmail.com> 
wrote:

Bob,

 

FWIW, there would be no VAT on export orders from the UK, but shipping is 
getting really expensive.

 

Neil Anderson

BT7

 

On Thu, Jan 12, 2017 at 11:04 AM, Bob Spidell <bspidell at comcast.net> wrote:

Well, I went ahead and ordered from Moss.  I did a cursory check of the 
interwebs didn't turn up anything of those dimensions here:

https://www.mcmaster.com/#standard-washers/=15uvd84

and here:

http://www.keybellevilles.com/bellevilles/sampleCatalog.php?gclid=CMCHjPHOuNECFQGRfgodVAoFuA

and others, and I need to get this car back together before I start losing the 
little bits.   FWIW, SC Parts and AH Spares have them at a more reasonable 
price--esp. with the current exchange rate--but with VAT and shipping it's not 
a massive savings.

My thanks to Olin, Bob and others who responded; if I come across these in this 
size I'll make a note for future reference.  Now, at least, I know what they're 
for and how to stack them.

Bob

 

On 1/10/2017 2:14 PM, Olin Brimberry wrote:

Bob,
 
I figured height of the spring was also important, so I put 2 together and 
measured the height with calipers
Height of 2 washers: 0.100 inches
Height of 1 washer: 0.050 inches
Thickness of washer: 0.025 inches
Checking the previous diameter dimensions with a caliper, I get:
 
ID: 1.057 inches
OD: 1.5 inches
 
I suspect that the ID is originally spec'd to be 1-1/16" but because of the 
slight "spring", the diameter is slightly less.  Good luck
 
Olin K. Brimberry, PE
Principal Engineer
obrimberry at hunterbane.com
Office - 919.803.4274 <tel:(919)%20803-4274> 
Mobile - 919.522.1608 <tel:(919)%20522-1608> 
 
HunterBane Engineering, PLLC
PO Box 10314
Raleigh, NC 27605
3306 Alamance Drive
Raleigh, NC 27609
 
 
 
-----Original Message-----
From: Olin Brimberry [mailto:obrimberry at hunterbane.com] 
Sent: Tuesday, January 10, 2017 4:34 PM
Subject: RE: [Healeys] Belleville washers in BN2 steering box
 
I just pulled mine out of a steering box I am rebuilding, and yes there are 6 
positioned as such: ()()() Where only the outer edges touch.  The dimensions 
are as follows:
 
ID: 1-1/16
OD: 1-1/2
Pictures of the measurements are attached for verification purposes.
 
The washers were loose on the shaft, but I think the closer tolerance is going 
to be on the OD side.
 
Olin K. Brimberry, PE
Principal Engineer
obrimberry at hunterbane.com
Office - 919.803.4274 <tel:(919)%20803-4274> 
Mobile - 919.522.1608 <tel:(919)%20522-1608> 
 
HunterBane Engineering, PLLC
PO Box 10314
Raleigh, NC 27605
3306 Alamance Drive
Raleigh, NC 27609
 
 
 

 

 

_______________________________________________
Archive: http://www.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys




 


_______________________________________________
Archive: http://www.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys




 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170114/cf8c3d03/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>