First thing to know is that they are handed and marked L and R, will not
fit if backwards. Paint may have filled the marks.
John
64/66 BJ8s
On 7/5/2017 1:29 PM, gablegerry at netscape.net wrote:
> I am having a devil of a time re-aligning the engine mounts on a BN6.
> They came off the same car not sure we got them on correctly after
> replacing the rubber and painting. First install the screws were way
> off the mark. The next two times they are closer but cannot get one
> side to accept the last two bolts. Frustrated.
>
>
> _
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170705/e16a40c8/attachment.html>
|