Hello,
I am in the process of putting my AH 3000 engine back together and went
looking for a recommendation for the engine thermostat. I was expecting to
find a recommendation for the opening temperature but instead found
information that recommends a bellows type thermostat should be used and the
bellows is important or some of the coolant can bypass the radiator when the
thermostat opens. If a bellows type thermostat is recommended is the correct
type either the Smiths 85025 series or the AC Delco TF series? Is there a
modern replacement bellows type thermostat that fails in the open position?
Your comments and insight is welcomed.
Harold
1960 BT7
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170903/95385b25/attachment.html>
|