Hmmm!
My 1962 tri-carb # 18617 ? May 1962 - has the later type solenoid. I am
virtually certain that it is the original ? I am the 2nd owner, bought the car
with some 45,000 miles on it approx 24 years ago. The entire car is very,
very, original.
It could be that the later solenoid start point was at the BJ7 introduction,
which was before this car was built. Which would mean that all top shift
tri?carbs (both BT and BN7?s) would have the late type solenoid.
Interesting stuff!
Earl Kagna
Victoria, B.C.
BJ8, BT7 tri-carb
From: Michael Salter
Sent: Sunday, September 03, 2017 9:14 AM
To: healeys at autox.team.net
Subject: Re: [Healeys] Starter Solenoid Guidelines help required
Thanks to all who responded to this question.
It seems likely that the early cast body solenoids were fitted until the end of
"roadster" production.
If anyone has a pre '63 car that has an original pressed steel solenoid I would
appreciate hearing from you.
Michael S
--------------------------------------------------------------------------------
From: Harold Manifold <manifold at telus.net>
Sent: Saturday, September 2, 2017 12:21:42 PM
To: 'Michael Salter'
Subject: RE: [Healeys] Starter Solenoid Guidelines help required
Michael,
I am sending a picture of the starter solenoid from my AH 3000. I have replaced
the solenoid in the picture but I believe it to be the original solenoid. It
has the cast aluminum body but I could not see any part numbers. This is the
car it was removed from:
AH 3000 Mk 1 BT7
Chassis number 13154
Date of build Oct 28 - Nov 2 1960
I have a question. Are bellows type thermostats still available and can you
suggest a source?
Regards,
Harold
--------------------------------------------------------------------------------
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Michael
Salter
Sent: Tuesday, August 29, 2017 12:31 PM
To: healeys at autox.team.net
Subject: [Healeys] Starter Solenoid Guidelines help required
?Oh wise ones!!!
I'm working on the revisions to the Concours Guidelines for 2018 and have a
?question that some of you may be able to help with.
Prior to about 1958 the starter solenoid used in Healeys was Lucas part number
76411. This type of solenoid can easily be identified by having a cast aluminum
body as on the left on the pic attached.
Later cars and all subsequent Lucas replacements had a pressed steel body as
illustrated on the right.
The change point is not noted in any of the parts books that I have.
If anyone has an original car with its original solenoid from around that date
I would appreciate hearing from you with the serial number of your car and the
solenoid type fitted.
Michael Salter
Concours Guidelines Editor.
--------------------------------------------------------------------------------
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170904/a7857c14/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1030724.JPG
Type: image/jpeg
Size: 4389791 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170904/a7857c14/attachment-0001.jpe>
|