A CMZ 0208 screw is a zinc plated, recessed countersunk machine screw - unified
threads - #6 X 1/2" long 32 threads per inch (UNC)
The source is the BMC Standards.
Gary Hodson
-----Original Message-----
From: David Nock BCS <healeydoc at sbcglobal.net>
To: i erbs <eyera3000 at gmail.com>; Larry Wendland <bighealey3k at aim.com>
Cc: Ahealey help <healeys at autox.team.net>
Sent: Wed, Nov 1, 2017 8:00 pm
Subject: Re: [Healeys] AH 3000 Ashtray Hold Down Screw
Screw sizes
6 x 40 8 x 36 10 x 32
David Nock
British Car Specialists
209-948-8767
www.britishcarspecialists.com
On Tue, Oct 31, 2017 at 2:11 PM, Larry Wendland <bighealey3k at aim.com> wrote:
Harold, I have a '67 BJ8 and its ash tray looks the same as the one in the
parts diagram. My screws are 6-32 counter sunk phillips head. I checked my
screws with my tap and die set and a 6-32 nut. I hope this helps you.
Larry
'67 BJ8
-----Original Message-----
From: Harold Manifold <manifold at telus.net>
To: healeys <healeys at autox.team.net>
Sent: Sat, Oct 28, 2017 8:44 pm
Subject: [Healeys] AH 3000 Ashtray Hold Down Screw
Hello out there,
Does anyone know the thread pitch for the ashtray hold down screws on an AH
3000 Mk1? Item 22 in the attached picture. The BMC part number is CMZ0208 so
I know it is #6 x 1/2" but I have to retap the threads and I don't have the
old screws.
Thanks in advance for your help.... Harold
_______________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20171102/82908fd8/attachment.html>
|