So's mine. BT7.
Simon
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len
and/or Marge Hartnett
Sent: 07 January 2018 06:07
To: AH Mail List <healeys at autox.team.net>
Subject: Re: [Healeys] Vacuum Advance Tube
Patrick: Mine is under the bolt head of the bottom bolt holding the heater
shut off valve to the engine block.
(The Other) Len
Fairfield, CA, USA
1967 AH 3000 MkIII, HBJ8L39031
----- Original Message -----
Sent: Saturday, January 06, 2018 6:49 PM
Subject: [Healeys] Vacuum Advance Tube
Hello
Greetings from Sydney where the temperature is a barmy 46C (114F). However
there is something comforting in that the Cricket test match between
Australia and England is proceeding.
Just cleaned and polished the narrow copper vacuum advance tube in the BN3
that goes from the rear carburettor around the back of the engine and then
to the distributor.
Bent around the tube towards the distributor is a steel clip that bolts on
to something, but my memory is failing me and the photos taken a few years
back don't show it.
Remember it is a very early six-cylinder engine. Perhaps it fastens to one
of the bolts holding the heater outlet to the cylinder head.
Can anyone help please?
Thank you
Patrick Quinn
Blue Mountains, Australia
_____
_______________________________________________
Archive: http://www.team.net/archive
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180107/270ef130/attachment.html>
|