The definitive story (see attached; courtesy Moss).
Also, my door windows rattled for years until I figured out the rear
channels were just a skosh too wide for the plastic guides; a slight
squeeze of the channel solved the rattling (too much and you'll bind the
window).
Bob
On 1/23/2018 7:48 PM, healeymanjim wrote:
> more than a few healeys i have worked on have scratched glass. i pull the
> sharp pointed sheet metal screws that someone
> has replaced the flat pointed original screws with ones i have ground off the
> points to a flat surface. i have also seen long
> panel screws that scratched glass. BEWARE!!!
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: doorpullscrews.pdf
Type: application/pdf
Size: 77610 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180124/02e8e3a7/attachment.pdf>
|