Make sure the rear channel in the door is not loose. If it is loose your
window will eventually shatter.
On Sun, May 13, 2018 at 11:11 PM, Bob Spidell <bspidell at comcast.net> wrote:
> Regarding the screws: https://mossmotors.com/media/
> instructions/314-251.pdf
>
> On 5/13/2018 5:57 AM, HealeyRick wrote:
>
> You probably need new nylon guides, available from Moss. Take it apart,
> clean and lubricate and check for smooth up and down. If it jams, check
> that the channels aren't kinked. Make sure the screws holding the chrome
> grab handle aren't too long or you'll scratch the windows.
>
> Rick Neville
>
> On Sun, May 13, 2018 at 7:48 AM Mitch Simmons <Dayton21 at comcast.net>
> wrote:
>
>>
>> Hello
>> I am about to fix my BJ8 roll up door windows....they are loose and hard
>> to roll up.
>> Any advice on this operation would be greatly appreciated as always
>> Cheers
>> Mitchell
>> Sent from my iPhone
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/healey.nut at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180514/30326894/attachment.html>
|