Hi all ,
Just in the process of installing a new intake manifold from AH Spares , I
installed a set of DW headers and was having fuel vaporize problems with the
stock manifold in contact with the headers . I had the headers ceramic coated
but the fitting of everything caused heat in the old intake manifold. Well with
any mods with anything your on your own to solve issues. Looks like I need a
longer carb link rod , no problem I measured the rear one going down to the
throttle pedal and it will do the job. I had the new manifold also ceramic
coated as a precaution. Plus it adds bling . My question is , has anyone done
this mod ? My car is a late production 67 BJ-8 PH II . And I need to find a set
of air filters that will fit . The stock won?t , and I?ve been using a DW
filter but even it won?t fit . Going to re install the DW exhaust system and
then try to figure out a filter system that will fit .
Thanks for our list and all the info that helps us keep our cars on the
road
Don .
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 3718969 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180602/250943a4/attachment-0001.jpeg>
-------------- next part --------------
Sent from my iPhone
|