healeys
[Top] [All Lists]

[Healeys] LED panel lights

Subject: [Healeys] LED panel lights
From: coudesluijs at chello.nl (Kees Oudesluijs)
Date: Fri, 3 Aug 2018 09:31:25 +0200
References: <002301d42a7d$89efcde0$9dcf69a0$@alexarevel.plus.com> <CAPAC+V5wEEDpjEkaVULxkNM0mJA7kLNtPCrtV8J=hY3nnUYxiA@mail.gmail.com>
I can imagine a problem with the LED ignition light as it may be part of 
a back feed system if I am correct. A tungsten bulb has far less 
resistance than an LED bulb so the charging may not work completely as 
it should. However the high beam indicator is just a bulb parallel with 
the high beam lights and do not present any problem.

Kees Oudesluijs



Op 2-8-2018 om 22:33 schreef Fred Wescoe:
> Simon,
>
> I have read the same thing about not using LED bulbs in the ignition 
> and high beam indicators.? However, I did replace them in my 66 BJ8 
> and all seems well.? No problems at all. Very easy to see during the 
> day and at night.? The instruments are also easier to see at night, 
> not bight white but still easier to see.
>
> Fred
> 66
>
> On Thu, Aug 2, 2018 at 12:26 PM, <simon.lachlan at alexarevel.plus.com 
>
>     I followed that thread with interest as my blue Main Beam and
>     green Indicator were always pretty dim.
>
>     I decided to get some of those little bulbs if I could find them
>     at a sensible price.
>
>     I decided to hunt down the size and reference of the bulb holder
>     and then seek the appropriate LEDs.
>
>     The bulb holder is an E10. Over here at least one can buy 10 of
>     the short flat ones for ?12:95 inc P&P. The longer ones are a
>     little more, but only pennies really.
>
>     I only point this out as people have been mentioning prices
>     approaching that for one single bulb. Just to let you know??
>
>     Now, I?ve put the bulbs in and they make a noticeable difference
>     to the Main Beam and the Indicator. The instruments? Not sure
>     until I go out at night?.they were OK anyhow. (I do hate
>     fossicking around behind the instruments. Always worry that I?ll
>     detach some vital wire or two.)
>
>     Question??haven?t I heard that LED bulbs aren?t suitable for the
>     red Ignition light? Why? Is there a way of making them work there?
>
>     Thanks,
>
>     Simon
>
>
>     _______________________________________________
>     Support Team.Net http://www.team.net/donate.html
>     <http://www.team.net/donate.html>
>     Suggested annual donation? $12.75
>
>     Archive: http://www.team.net/pipermail/healeys
>     <http://www.team.net/pipermail/healeys>
>
>     http://autox.team.net/mailman/listinfo/healeys
>     <http://autox.team.net/mailman/listinfo/healeys>
>
>     Unsubscribe/Manage:
>     http://autox.team.net/mailman/options/healeys/fredwescoe at gmail.com
>     <http://autox.team.net/mailman/options/healeys/fredwescoe at gmail.com>
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs 
> at chello.nl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20180803/133f117b/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>