--===============1360888217503302103==
--00000000000068c9e0058dafe31f
Content-Transfer-Encoding: quoted-printable
Been running my oem radistor with more cores and fixed filler neck, and
metsl flex fan. Car ran at 189 F, rose to 210 in traffic, but dropped back
down. No overflow when we stopped.
So Im goi g to call this fixed. Sm working to turn my pull electric fan
into a push unit with thermostatic controll and manual over ride.
Ira Erbs
Portland, OR
typos and artifacts are the fault of my phone
On Sun, Jul 14, 2019, 8:01 PM richard mayor <boyracer466@gmail.com> wrote:
> 70 MPH? Hmmmmm. After a drive the other day, I started doing some wor=
k
> on the engine and I was standing next to my front fender - that has rally
> vents --and felt a lot of hot air coming out of the vent. I have an
> electric fan and it had come on at the end of my drive as the temperature
> started to climb above 190 degrees. And, the hood (bonnet) was in the
> raised position.
>
> On Sun, Jun 2, 2019 at 8:08 AM josef-eckert@t-online.de <
> josef-eckert@t-online.de> wrote:
>
>> My opinion.
>>
>> Side vents help at speeds above app. 70 miles/h for race cars.
>>
>> Louvers are just a gimmick. help nothing, only cause trouble in rain
>> (mainly when car is parked somewhere).
>>
>>
>>
>> Josef Eckert
>>
>>
>>
>>
>>
>>
>>
>> -----Original-Nachricht-----
>>
>> Betreff: Re: [Healeys] alum radiator swap
>>
>> Datum: 2019-06-02T16:16:51+0200
>>
>> Von: "Bob Spidell" <bspidell@comcast.net>
>>
>> An: "healeys@autox.team.net" <healeys@autox.team.net>
>>
>>
>>
>>
>>
>>
>>
>> While we're (sort of) on topic, what is the List wisdom on the efficacy
>> of fitting side vents to the front wings (a la rally cars)? Since,
>> supposedly, a big part of the issue with Healeys overheating is
>> insufficient airflow through the engine bay, I'd expect them to help qui=
te
>> a bit. Or, or they 'useless' as well, since the main overheating issue =
is
>> stopped at idle?
>>
>> Not sure if the louvers on my 100M help. It still gets a bit warm
>> stopped at idle, but not as much as my BJ8 (but I haven't driven the M a=
s
>> much, smaller engine, etc.).
>>
>> Bob
>> On 6/2/2019 1:19 AM, Kees Oudesluijs wrote:
>>
>> Yes and no.
>>
>> An old car should be fit for any normal drive, be it regularly or
>> occasionally, at leisure or in modern heavy traffic. This means that man=
y
>> classic cars will need some assistance with the cooling, i.e. an electri=
c
>> fan, either manually or thermostatically controlled.
>>
>> An aluminium radiator is indeed a gimmick and does not add anything at
>> all. It will probably wear out faster due to corrosion. It is just cheap=
to
>> manufacture and does not improve the cooling efficiency.
>>
>> What improves cooling efficiency is increasing the running temperature o=
f
>> the engine by fitting a hotter thermostat thus creating a larger delta T=
,
>> fitting a more efficient water pump to increase the coolant flow, enlarg=
ing
>> the total surface area of the radiator, i.e. more rows (up to a point),
>> larger matrix or increase the air flow through the radiator, i.e. improv=
ed
>> cowling, more blades to the fixed fan, higher engine idling speed but mo=
st
>> of all a thermostatically controlled fan in combination with a carefully
>> chosen thermostat and thermoswitch.
>>
>> Kees Oudesluijs
>>
>>
>>
>>
>> Op 2-6-2019 om 08:53 schreef josef-eckert@t-online.de:
>>
>> When you use genuine parts to replace faulty ones and when you keep the
>> car propperly maintained and when you use the old car only occasionally
>> for fun drives just to enjoy driving it, there is no problem with an old
>> car.
>>
>> PS: Aluminium radiator is something nobody needs in a classic car as it
>> improves nothing. Just a useless gimmick.
>>
>>
>>
>> Josef Eckert
>>
>> K=C3=B6nigswinter/Germany
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> -----Original-Nachricht-----
>>
>> Betreff: [Healeys] alum radiator swap
>>
>> Datum: 2019-06-02T00:21:42+0200
>>
>> Von: "i erbs" <eyera3000@gmail.com> <eyera3000@gmail.com>
>>
>> An: "Ahealey help" <healeys@autox.team.net> <healeys@autox.team.net>
>>
>>
>>
>>
>>
>>
>> Aluminum radiator swap update:
>> Got my old oem unit out. Removed my nice newish metal flex fan. spliced
>> wires onto the electric fan for easy connect/disconnect and then went to
>> double-check the new radiator will work after and initial trial fit. Wha=
t I
>> found: OEM radiator is 1/2" wider and the aluminum radiator does not hav=
e
>> tapped holes, so nuts will be needed to attach to my car. I am outside o=
f
>> the return window.
>> So it looks like I will be getting my OEM Radiator flow tested and tanke=
d.
>> Will reinstall my flex fan
>> refill with coolant/water
>> have installed a new sleeved thermostat to replace the non-sleeved unit.
>> I can make some shims for the new radiator, but cutting threads in the
>> holes will most likely result in the holes being to big for the bolts.
>> Fun with old cars
>> Registered for a car show on June 8th....
>> Ira Erbs
>> Portland,OR
>> _______ _______
>> (______ \____1959 BN4____/ _______)
>> (_________________________)
>> BT7 engine and disk brakes
>>
>>
>> 1967 MGB [image: MG]
>>
>> A racing car is an animal with a thousand adjustments. Mario Andretti
>> Please excuse random auto corrects and misspelled words
>>
>> =EF=BB=BF
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
>>
>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
--00000000000068c9e0058dafe31f
Content-Transfer-Encoding: quoted-printable
<div dir=3D"auto">Been running my oem radistor with more cores and fixed fi=
ller neck, and metsl flex fan. Car ran at 189 F, rose to 210 in traffic, bu=
t dropped back down. No overflow when we stopped.<div dir=3D"auto">So Im go=
i g to call this fixed. Sm working to turn my pull electric fan into a push=
unit with thermostatic controll and manual over ride.=C2=A0<br><br><div da=
ta-smartmail=3D"gmail_signature" dir=3D"auto">Ira Erbs<br>Portland, OR<br>t=
ypos and artifacts are the fault of my phone</div></div></div><br><div clas=
s=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Sun, Jul 14, 201=
9, 8:01 PM richard mayor <<a href=3D"mailto:boyracer466@gmail.com";>boyra=
cer466@gmail.com</a>> wrote:<br></div><blockquote class=3D"gmail_quote" =
style=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><di=
v dir=3D"ltr">70 MPH?=C2=A0=C2=A0 Hmmmmm.=C2=A0=C2=A0 After a drive the oth=
er day, I started doing some work on the engine and I was standing next to =
my front fender - that has rally vents --and felt a lot of hot air coming o=
ut of the vent.=C2=A0=C2=A0 I have an electric fan and it had come on at th=
e end of my drive as the temperature started to climb above 190 degrees. =
=C2=A0 And, the hood (bonnet) was in the raised position. =C2=A0<br></div><=
br><div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Sun,=
Jun 2, 2019 at 8:08 AM <a href=3D"mailto:josef-eckert@t-online.de"; target=
=3D"_blank" rel=3D"noreferrer">josef-eckert@t-online.de</a> <<a href=3D"=
mailto:josef-eckert@t-online.de"; target=3D"_blank" rel=3D"noreferrer">josef=
-eckert@t-online.de</a>> wrote:<br></div><blockquote class=3D"gmail_quot=
e" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204)=
;padding-left:1ex"><div><p style=3D"margin:0px"><span style=3D"font-family:=
arial,helvetica,sans-serif;font-size:10pt;color:rgb(0,0,0);text-decoration:=
none">My opinion.<br></span></p>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helvetica,sans-ser=
if;font-size:10pt;color:rgb(0,0,0);text-decoration:none">Side=C2=A0 vents h=
elp at speeds above app. 70 miles/h for race cars.</span></p>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helvetica,sans-ser=
if;font-size:10pt;color:rgb(0,0,0);text-decoration:none">Louvers are just a=
gimmick. help nothing, only cause trouble in rain (mainly when car is park=
ed somewhere).</span></p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helvetica,sans-ser=
if;font-size:10pt;color:rgb(0,0,0);text-decoration:none">Josef Eckert</span=
></p>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helvetica,sans-ser=
if;font-size:10pt;color:rgb(0,0,0);text-decoration:none">=C2=A0</span></p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">-----Original-Nachricht-----</p>
<p style=3D"margin:0px">Betreff: Re: [Healeys] alum radiator swap</p>
<p style=3D"margin:0px">Datum: 2019-06-02T16:16:51+0200</p>
<p style=3D"margin:0px">Von: "Bob Spidell" <<a href=3D"mailto:=
bspidell@comcast.net" target=3D"_blank" rel=3D"noreferrer">bspidell@comcast=
.net</a>></p>
<p style=3D"margin:0px">An: "<a href=3D"mailto:healeys@autox.team.net"=
target=3D"_blank" rel=3D"noreferrer">healeys@autox.team.net</a>" <=
<a href=3D"mailto:healeys@autox.team.net"; target=3D"_blank" rel=3D"noreferr=
er">healeys@autox.team.net</a>></p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">=C2=A0</p>
<div>
<p style=3D"margin:0px">While we're (sort of) on topic, what is the Lis=
t wisdom on the efficacy of fitting side vents to the front wings (a la ral=
ly cars)?=C2=A0 Since, supposedly, a big part of the issue with Healeys ove=
rheating is insufficient airflow through the engine bay, I'd expect the=
m to help quite a bit.=C2=A0 Or, or they 'useless' as well, since t=
he main overheating issue is stopped at idle?</p>
<p style=3D"margin:0px">Not sure if the louvers on my 100M help.=C2=A0 It s=
till gets a bit warm stopped at idle, but not as much as my BJ8 (but I have=
n't driven the M as much, smaller engine, etc.).</p>
<p style=3D"margin:0px">Bob</p>
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764moz-cite-pref=
ix">On 6/2/2019 1:19 AM, Kees Oudesluijs wrote:</div>
<blockquote>
<p style=3D"margin:0px">Yes and no.</p>
<p style=3D"margin:0px">An old car should be fit for any normal drive, be i=
t regularly or occasionally, at leisure or in modern heavy traffic. This me=
ans that many classic cars will need some assistance with the cooling, i.e.=
an electric fan, either manually or thermostatically controlled.</p>
<p style=3D"margin:0px">An aluminium radiator is indeed a gimmick and does =
not add anything at all. It will probably wear out faster due to corrosion.=
It is just cheap to manufacture and does not improve the cooling efficienc=
y. </p>
<p style=3D"margin:0px">What improves cooling efficiency is increasing the =
running temperature of the engine by fitting a hotter thermostat thus creat=
ing a larger delta T, fitting a more efficient water pump to increase the c=
oolant flow, enlarging the total surface area of the radiator, i.e. more ro=
ws (up to a point), larger matrix or increase the air flow through the radi=
ator, i.e. improved cowling, more blades to the fixed fan, higher engine id=
ling speed but most of all a thermostatically controlled fan in combination=
with a carefully chosen thermostat and thermoswitch.</p>
<p style=3D"margin:0px">Kees Oudesluijs</p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">=C2=A0</p>
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764moz-cite-pref=
ix">Op 2-6-2019 om 08:53 schreef <a class=3D"m_3275748353942686671gmail-m_8=
772433209157760764moz-txt-link-abbreviated" href=3D"mailto:josef-eckert@t-o=
nline.de" target=3D"_blank" rel=3D"noreferrer">josef-eckert@t-online.de</a>=
:</div>
<blockquote>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helvetica,sans-ser=
if;font-size:10pt;color:rgb(0,0,0);text-decoration:none">When you use genui=
ne parts to replace faulty ones and when you keep the car propperly maintai=
ned=C2=A0 and when you use the old car only occasionally for fun drives jus=
t to enjoy driving it, there is no problem with an old car.<br></span></p>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helvetica,sans-ser=
if;font-size:10pt;color:rgb(0,0,0);text-decoration:none">PS: Aluminium radi=
ator is something nobody needs in a classic car as it improves nothing. Jus=
t a useless gimmick.</span></p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helvetica,sans-ser=
if;font-size:10pt;color:rgb(0,0,0);text-decoration:none">Josef Eckert</span=
></p>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helvetica,sans-ser=
if;font-size:10pt;color:rgb(0,0,0);text-decoration:none">K=C3=B6nigswinter/=
Germany</span></p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px"><span style=3D"font-family:arial,helvetica,sans-ser=
if;font-size:10pt;color:rgb(0,0,0);text-decoration:none">=C2=A0</span></p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">-----Original-Nachricht-----</p>
<p style=3D"margin:0px">Betreff: [Healeys] alum radiator swap</p>
<p style=3D"margin:0px">Datum: 2019-06-02T00:21:42+0200</p>
<p style=3D"margin:0px">Von: "i erbs" <a class=3D"m_3275748353942=
686671gmail-m_8772433209157760764moz-txt-link-rfc2396E" href=3D"mailto:eyer=
a3000@gmail.com" target=3D"_blank" rel=3D"noreferrer"><eyera3000@gmail.c=
om></a></p>
<p style=3D"margin:0px">An: "Ahealey help" <a class=3D"m_32757483=
53942686671gmail-m_8772433209157760764moz-txt-link-rfc2396E" href=3D"mailto=
:healeys@autox.team.net" target=3D"_blank" rel=3D"noreferrer"><healeys@a=
utox.team.net></a></p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">=C2=A0</p>
<p style=3D"margin:0px">=C2=A0</p>
<div>
<div dir=3D"ltr">
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-" style=
=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(29,33,41);font-size:14=
px;white-space:pre-wrap">
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-_1mf m_=
3275748353942686671gmail-m_8772433209157760764gmail-_1mj" style=3D"directio=
n:ltr;font-family:inherit"><span style=3D"font-family:inherit"><span style=
=3D"font-family:inherit">Aluminum radiator swap update:</span></span></div>
</div>
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-" style=
=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(29,33,41);font-size:14=
px;white-space:pre-wrap">
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-_1mf m_=
3275748353942686671gmail-m_8772433209157760764gmail-_1mj" style=3D"directio=
n:ltr;font-family:inherit"><span style=3D"font-family:inherit"><span style=
=3D"font-family:inherit">Got my old oem unit out. Removed my nice newish me=
tal flex fan. spliced wires onto the electric fan for easy connect/disconne=
ct and then went to double-check the new radiator will work after and initi=
al trial fit. What I found: OEM radiator is 1/2" wider and the aluminu=
m radiator does not have tapped holes, so nuts will be needed to attach to =
my car. I am outside of the return window.</span></span></div>
</div>
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-" style=
=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(29,33,41);font-size:14=
px;white-space:pre-wrap">
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-_1mf m_=
3275748353942686671gmail-m_8772433209157760764gmail-_1mj" style=3D"directio=
n:ltr;font-family:inherit"><span style=3D"font-family:inherit"><span style=
=3D"font-family:inherit">So it looks like I will be getting my OEM Radiator=
flow tested and tanked.</span></span></div>
</div>
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-" style=
=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(29,33,41);font-size:14=
px;white-space:pre-wrap">
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-_1mf m_=
3275748353942686671gmail-m_8772433209157760764gmail-_1mj" style=3D"directio=
n:ltr;font-family:inherit"><span style=3D"font-family:inherit"><span style=
=3D"font-family:inherit">Will reinstall my flex fan</span></span></div>
</div>
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-" style=
=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(29,33,41);font-size:14=
px;white-space:pre-wrap">
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-_1mf m_=
3275748353942686671gmail-m_8772433209157760764gmail-_1mj" style=3D"directio=
n:ltr;font-family:inherit"><span style=3D"font-family:inherit"><span style=
=3D"font-family:inherit">refill with coolant/water</span></span></div>
</div>
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-" style=
=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(29,33,41);font-size:14=
px;white-space:pre-wrap">
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-_1mf m_=
3275748353942686671gmail-m_8772433209157760764gmail-_1mj" style=3D"directio=
n:ltr;font-family:inherit"><span style=3D"font-family:inherit"><span style=
=3D"font-family:inherit">have installed a new sleeved thermostat to replace=
the non-sleeved unit.</span></span></div>
</div>
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-" style=
=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(29,33,41);font-size:14=
px;white-space:pre-wrap">
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-_1mf m_=
3275748353942686671gmail-m_8772433209157760764gmail-_1mj" style=3D"directio=
n:ltr;font-family:inherit"><span style=3D"font-family:inherit"><span style=
=3D"font-family:inherit">I can make some shims for the new radiator, but cu=
tting threads in the holes will most likely result in the holes being to bi=
g for the bolts.</span></span></div>
</div>
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-" style=
=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(29,33,41);font-size:14=
px;white-space:pre-wrap">
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-_1mf m_=
3275748353942686671gmail-m_8772433209157760764gmail-_1mj" style=3D"directio=
n:ltr;font-family:inherit"><span style=3D"font-family:inherit"><span style=
=3D"font-family:inherit">Fun with old cars</span></span></div>
</div>
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-" style=
=3D"font-family:Helvetica,Arial,sans-serif;color:rgb(29,33,41);font-size:14=
px;white-space:pre-wrap">
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail-_1mf m_=
3275748353942686671gmail-m_8772433209157760764gmail-_1mj" style=3D"directio=
n:ltr;font-family:inherit"><span style=3D"font-family:inherit"><span style=
=3D"font-family:inherit">Registered for a car show on June 8th....</span></=
span></div>
</div>
<div>
<div class=3D"m_3275748353942686671gmail-m_8772433209157760764gmail_signatu=
re" dir=3D"ltr">
<div dir=3D"ltr">
<div>
<div dir=3D"ltr">
<div>
<div dir=3D"ltr">
<div>
<div dir=3D"ltr">
<div>
<div dir=3D"ltr">
<div>
<div dir=3D"ltr">
<div>
<div dir=3D"ltr">
<div dir=3D"ltr">Ira Erbs
<div>Portland,OR</div>
<div><span>=C2=A0 =C2=A0 =C2=A0 _______ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0 =C2=A0_______</span><br><span>=C2=A0 =C2=A0=C2=A0 (______ \____1959 BN4=
____/ _______)</span><br><span>=C2=A0 =C2=A0 =C2=A0 =C2=A0=C2=A0 (_________=
________________)</span></div>
<div>=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 BT7 engine and disk brakes</div>
<div>=C2=A0</div>
<div>=C2=A0</div>
<div>1967 MGB =C2=A0<img src=3D"http://www.britishcarspecialists.com/assets=
/images/MG_emblem.jpg" alt=3D"MG"></div>
<div>=C2=A0</div>
<div><span>A racing car is an animal with a thousand adjustments. Mario And=
retti</span></div>
<div>Please excuse random auto corrects and misspelled words</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<br><fieldset class=3D"m_3275748353942686671gmail-m_8772433209157760764mime=
AttachmentHeader"></fieldset></blockquote>
<pre class=3D"m_3275748353942686671gmail-m_8772433209157760764moz-quote-pre=
"> </pre>
</blockquote>
</div>=EF=BB=BF</div>_______________________________________________<br>
rer noreferrer" target=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://www.team.net/pipermail/healeys</a> <=
a href=3D"http://autox.team.net/archive"; rel=3D"noreferrer noreferrer" targ=
et=3D"_blank">http://autox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank" rel=3D"noreferr=
er">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://autox.team.net/mailman/listinfo/heal=
eys</a><br>
<br>
s/boyracer466@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">ht=
tp://autox.team.net/mailman/options/healeys/boyracer466@gmail.com</a><br>
<br>
</blockquote></div>
_______________________________________________<br>
rer noreferrer" target=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://www.team.net/pipermail/healeys</a> <=
a href=3D"http://autox.team.net/archive"; rel=3D"noreferrer noreferrer" targ=
et=3D"_blank">http://autox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank" rel=3D"noreferr=
er">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://autox.team.net/mailman/listinfo/heal=
eys</a><br>
<br>
s/eyera3000@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">http=
://autox.team.net/mailman/options/healeys/eyera3000@gmail.com</a><br>
<br>
</blockquote></div>
--00000000000068c9e0058dafe31f--
--===============1360888217503302103==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============1360888217503302103==--
|