A while ago, I bought a 'sensitive' brake light switch from Ron Francis
Racing (IIRC, based on a recommendation from someone here). Today I
tried to install it and it has the wrong threads, which I only realized
after fabbing a couple leads for it. So my question is, does anybody
make a higher-quality--i.e. more sensitive--switch that will actually
fit a Healey's brake lines? I've got a mechanical switch, but would
prefer to stay with the hydraulic if I can find one that doesn't take a
quarter-pedal of motion to activate.
Also, the threads on my (now broken) current switch appear to be
machine, whereas the RFR switch was 1/8" pipe; anyone know what the
correct size of the current switch is (I had to put it back in to stop
the leak).
TIA,
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|