--===============2196160743817645657==
--000000000000c01032058f3e7202
Figured it out. The double electrical connector in the engine compartment
on the firewall wasn't getting power from the red wire from the light
switch. The bullet connector was loose into the connector. It all works now.
Mark Fawcett
On Sat, Aug 3, 2019 at 12:04 PM Mark Fawcett <m.fawcett@cox.net> wrote:
> Just realized that my side/running lights front and rear don't light. I
> don't drive at night very often so I don't know how long this has been the
> case. Head lights, turn signals and brake lights operate as normal. Checked
> the dash lights and they work when the switch is in the middle position. I
> bypassed the light switch and put power directly to the light circuit, but
> nothing. I checked the fuse that I put in to protect the circuit, it's OK.
> Not sure where to go from here. Any help would be appreciated.
>
> Mark Fawcett
> 1959 BT7
>
--000000000000c01032058f3e7202
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">Figured it out. The double electrical connector in the eng=
ine compartment on the firewall wasn't getting power from the red wire =
from the light switch. The bullet connector was loose into the connector. I=
t all works now.<div><br></div><div>Mark Fawcett</div><div><br></div></div>=
<br><div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Sat=
, Aug 3, 2019 at 12:04 PM Mark Fawcett <<a href=3D"mailto:m.fawcett@cox.=
net">m.fawcett@cox.net</a>> wrote:<br></div><blockquote class=3D"gmail_q=
uote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,2=
04);padding-left:1ex"><div dir=3D"ltr">Just realized that my side/running l=
ights front and rear don't light. I don't drive at night very often=
so I don't know how long this has been the case. Head lights, turn sig=
nals and brake lights operate as normal. Checked the dash lights and they w=
ork when the switch is in the middle position. I bypassed the light switch =
and put power directly to the light circuit, but nothing. I checked the fus=
e that I put in to protect the circuit, it's OK.
Not sure where to go from here. Any help=C2=A0would be appreciated.<div><br=
></div><div>Mark Fawcett</div><div>1959 BT7</div></div>
</blockquote></div>
--000000000000c01032058f3e7202--
--===============2196160743817645657==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============2196160743817645657==--
|