| To: | "Albaugh, Neil" <albaugh_neil@ti.com> | 
|---|---|
| Subject: | Re: Rules Q and Electrical Q | 
| From: | Dave Dahlgren <ddahlgren@snet.net> | 
| Date: | Sat, 18 Oct 2003 05:37:58 -0400 | 
| I think they are supposed to be wound in opposite directions.. Dave "Albaugh, Neil" wrote: > > Mayf; > > Some books recommend using two return springs in a coaxial arrangement using > a large coil spring with another smaller diameter one inside the larger one. > Don't do that! I had the two spring coils get tangled together under > vibration and it jammed the throttle open-- fortunately without incident. > > Regards, Neil Tucson, AZ | 
| <Prev in Thread] | Current Thread | [Next in Thread> | 
|---|---|---|
| 
 | ||
| Previous by Date: | Re: QUESTION about LSR Studebaker with Buggy Spring Beam Front, Dave Dahlgren | 
|---|---|
| Next by Date: | Roll Centre Solid axles., Malcolm Pittwood | 
| Previous by Thread: | RE: Rules Q and Electrical Q, Albaugh, Neil | 
| Next by Thread: | RE: Rules Q and Electrical Q, Albaugh, Neil | 
| Indexes: | [Date] [Thread] [Top] [All Lists] |