There are two products that I've found useful when working on wiring
anything that is going to be on the salt.
Silicone Brake Caliper Grease and Dielectric Compound.
I get it in a 3 oz tube from the Ford dealer for less than $10 and use it very
liberally on what ever is at the ends of the wire. Keep a roll of paper towels
handy to wipe off the excess.
Liquid Electrical Tape.
It does an amazing job of sealing just about anything. It can be used to make
a cheap relay waterproof. The same with cheap crimp connectors.
Bryan
|