Re: Dry Sump Musings

To:	joyseydevil@comcast.net, land-speed@autox.team.net
Subject:	Re: Dry Sump Musings
From:	Flowbench@aol.com
Date:	Fri, 26 May 2006 00:48:03 EDT

I don't use aluminum rods in my B-ville engines but I know many who do. One  
reason I don't is I would want to cycle the out every 3 or 4 years... so a  
couple or 3 of sets of alloys would cost as much as a good set of steel  rods.
Mike

<Prev in Thread]	Current Thread	[Next in Thread>
Re: Dry Sump Musings, (continued) Re: Dry Sump Musings, Bryan Savage RE: Dry Sump Musings, Dave Dahlgren Re: Dry Sump Musings, Bryan Savage Re: Dry Sump Musings, Ed Weldon RE: Dry Sump Musings, 3 liter Re: Dry Sump Musings, Bryan Savage RE: Dry Sump Musings, Dave Dahlgren Re: Dry Sump Musings, Bryan Savage RE: Dry Sump Musings, Dave Dahlgren Re: Dry Sump Musings, Askotto Re: Dry Sump Musings, Flowbench <= Re: Dry Sump Musings, Flowbench Re: Dry Sump Musings, Flowbench Re: Dry Sump Musings, jkamo Dry Sump Musings, Pile,Chris RE: Dry Sump Musings, Dave Dahlgren Re: Dry Sump Musings, Doug Odom RE: Dry Sump Musings, Jim Webb

Previous by Date:	Re: Dry Sump Musings, Askotto
Next by Date:	Re: Dry Sump Musings, Flowbench
Previous by Thread:	Re: Dry Sump Musings, Askotto
Next by Thread:	Re: Dry Sump Musings, Flowbench
Indexes:	[Date] [Thread] [Top] [All Lists]