land-speed
[Top] [All Lists]

Re: [Land-speed] Inexpensive Pressure Transducer

To: "'Jonathan Amo'" <webmaster@landracing.com>, <drmayf@mayfco.com>,
Subject: Re: [Land-speed] Inexpensive Pressure Transducer
From: <neil@dbelltech.com>
Date: Sun, 11 Nov 2007 18:11:49 -0700
Mayf, Jon;

Digi- Key is a great source for all sorts of electronic components. If you
can't find a pressure transducer there, try Omega Engineering-- they have
all sorts of transducers, sensors, etc. 

Here is one example:

  http://www.omega.com/ppt/pptsc.asp?ref=PX138&Nav=preb03

To get a calibrated 5V output you need to provide it with an 8V source. This
can be a simple voltage regulator (not an automotive voltage regulator) that
is connected to your 12V system.

Regards, Neil  Tucson, AZ

-----Original Message-----
From: Jonathan Amo [mailto:webmaster@landracing.com] 
Sent: Sunday, November 11, 2007 5:15 PM
To: neil@dbelltech.com; drmayf@mayfco.com; jyturbo@yahoogroups.com;
tweecer@yahoogroups.com; 'LSR'
Subject: Re: [Land-speed] Inexpensive Pressure Transducer

I get all my transducers at DigiKey. They have a comprehensive website for 
just about anything in that arena. They are great sensors have just about 
anything. I believe I spent about $80 on one for my fuel system. It was 
1/8" pipe and takes a 5v reference voltage. There are others that take a 12V

ref if that is what you need for your system. I think Mayf's application and

systems used are all a 5v reference.

Jon

----- Original Message ----- 
From: <neil@dbelltech.com>
To: <drmayf@mayfco.com>; <jyturbo@yahoogroups.com>; 
<tweecer@yahoogroups.com>; "'LSR'" <land-speed@autox.team.net>
Sent: Sunday, November 11, 2007 12:30 PM
Subject: Re: [Land-speed] Inexpensive Pressure Transducer


> Mayf;
>
> I've seen many pressure transducers on eBay. Most will probably require a
> higher voltage power supply and others are a 4- 20mA current loop output.
> Keep looking and you'll find one.
>
> Regards, Neil  Tucson, AZ
>
> -----Original Message-----
> From: land-speed-bounces+neil=dbelltech.com@autox.team.net
> [mailto:land-speed-bounces+neil=dbelltech.com@autox.team.net] On Behalf Of
> drmayf
> Sent: Saturday, November 10, 2007 7:36 PM
> To: jyturbo@yahoogroups.com; tweecer@yahoogroups.com; LSR
> Subject: [Land-speed] Inexpensive Pressure Transducer
>
> I want to record fuel pressure. Anyone know of a cheap transducer that
> will work? I have 5 volts available to power it. I think its range
> should be around 0 - 100 psi. Anybody know of such a cheap beast?
>
> mayf
_______________________________________________

Land-speed mailing list

http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>