Hey all, the guy that wants to build headers for my streamliner wants to run
them up around the back of the motor and over the radiator and over the fuel
cell, If this happens, the pipes will be about 4 inches above the fuel cell.
He says if I ceramic coat inside and out the pipes and ceramic coat the box
within which the fuel cell is found, that heat won't be a problem. I want to
run pipes down beside the motor and out the side essentially. Thoughts?
Thanks, Tom
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|