mg-t
[Top] [All Lists]

Re: [mg-tabc] shocker fluid

To: "Awini Ambuj Shanker" <alviss@hotmail.com>,
Subject: Re: [mg-tabc] shocker fluid
From: "Ray" <spook01@home.com>
Date: Tue, 19 Feb 2002 08:57:39 -0600
I've used motorcycle fork oil, and it comes in various viscosities.
Best Regards,
Ray
"Remember- It's the collision with the planet that counts!"
----- Original Message -----
From: "C Sherriff" <100070.740@compuserve.com>
To: "Awini Ambuj Shanker" <alviss@hotmail.com>
Cc: <pre-xk@jag-lovers.org>; <rolls-bentley@autox.team.net>;
<mg-tabc@yahoogroups.com>; <mg-t@autox.team.net>;
<british-cars-pre-war@autox.team.net>; <trraghu@yahoo.com>
Sent: Tuesday, February 19, 2002 6:29 AM
Subject: [mg-tabc] shocker fluid


> Message text written by "Awini Ambuj Shanker"
> >can anyone tell me if an alternate fluid to shocker oil can be used in
> prewar lever action shocks? i want to fill up the shocks on my 1939
lagonda
>
> and shocker fluid for this aplication is not availible here in india,
> someone sugested engine oil and TQ oil (for automatic transmisions) but im
> not sure i want to put them,another friend sugested hydraulic fluid for
the
>
> citroen DS(someone has about a gallon availible)  would do the job well,
> but
> will it?<
> ===============================================
> Awini
>
> I shall be interested in others suggestions.
>
> A good alternative is the oil used in Hydraulic Jacks it has the right
> non compresable qualities. - and it is available in various grades
> and a bit of experimentation might be in order if you do have any
> of the original fluid to compare the viscosity with.
>
> To do this make a container with a small hole in the bottom ( say
> 1/16 inch)  Measure a known quantity of the original fluid - pour
> into the container and measure the time taken to drain.  Now take
> the same quantity of the new fluid - at the same temperature
> (important) and repeat.  If the second time is less the new fluid its too
> thin - If more then too thick!
>
> When you find one thats right fill the shock absorber and see how it
> feels = then if not right use thicker or thinner oils as appropriate.
>
> Regards
>
> Clive
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t


<Prev in Thread] Current Thread [Next in Thread>
  • Re: [mg-tabc] shocker fluid, Ray <=