Re: MG TD Engine Plate Removal

[Bullwinkle <yd3@nvc.net>]

Douglas:

<<<snip>>>
It seems to be held on with a large central rivet and there
is a little tit on the inside of the crankcase.
<<<snip>>>
That little "tit" is probably the end of the drive rivet.  I
have removed these on two engines before sending the blocks
in to be worked on.  I used a small pin punch.

Blake

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t