In a message dated 11/28/2004 10:39:42 PM Pacific Standard Time,
Moosescum@yahoo.com writes:
> I never shimmed the body tub.
>
> First set the tub on the frame and bolt it down before setting the
> doors.
>
> I usually have been able to fit the doors by bending the hinges.
>
> Years ago, I had a body man, worked for a car company, tell me that
> quite often they just put a timber und the door and lifted to raise a
> sagging door. Use a block of wood under the door so you don't bend the
> lip. So, quite often that will work.
>
> I have also placed packing under the body hinges, and or, the door
> sticker plates in the tub. I have never used packing on the door
> itself.
>
> Regards,
> Blake
>
>
>
Hi Blake, thanks for this info.......email to your moosescum address is
bouncing back........
Terry
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|