mg-t
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Mg-t] MG T series push rods

from [John Seim] [Permanent Link][Original]
To: mg-tabc@yahoogroups.com
Subject: [Mg-t] MG T series push rods
From: John Seim <kingseim@earthlink.net>
Date: Tue, 26 May 2009 08:01:09 -0700 
What is the best recommended method for attaching the components of
a push rod together. Weld, epoxy, or ?
I've got some with a loose end.

John Seim
Irvine, CA
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t

Archives at http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Mg-t] MG T series push rods, John Seim <=
Previous by Date:  Re: [Mg-t] MG Td push rods, Bob Howard
Next by Date:  [Mg-t] New PA legislation !!! FYI & FWIW, Ed's Shop
Previous by Thread:  [Mg-t] TD front axle, Mike Duvall
Next by Thread:  [Mg-t] New PA legislation !!! FYI & FWIW, Ed's Shop
Indexes:  [Date] [Thread] [Top] [All Lists]