mg-t
[Top] [All Lists]

Re: [Mg-t] More TD work, a.k.a. First day of retirement

To: richardolindsay@gmail.com, mgs@autox.team.net, mg-t@autox.team.net, rui.gigante@gmail.com, neiltshannon@gmail.com
Subject: Re: [Mg-t] More TD work, a.k.a. First day of retirement
From: Sonny Surles <nsurles@aol.com>
Date: Tue, 2 Apr 2013 22:33:10 -0400 (EDT)
Delivered-to: mharc@autox.team.net
Delivered-to: mg-t@autox.team.net
References: <CAOc+-dwvL_CCFKfVoUCNOnfNoXHjsER6DrM1-+fG-KcnX6RncQ@mail.gmail.com>
This is encouragement for many of us.  Thanks for sharing, terrific!


Sonny



-----Original Message-----
From: Richard Lindsay <richardolindsay@gmail.com>
To: mgs <mgs@autox.team.net>; mg-t <mg-t@autox.team.net>; Rui Gigante
<rui.gigante@gmail.com>; Neil Shannon <neiltshannon@gmail.com>
Sent: Mon, Apr 1, 2013 4:30 pm
Subject: [Mg-t] More TD work, a.k.a. First day of retirement


Its the first day of my retirement and...wait for it...YES!  I got a
call this afternoon from the company asking about some data I
processed!  No escape!  However, I have had a good day in the garage.
Story follows;

A couple of days ago I wrote to you stating that I would probably
rebuild the '53 TD's fuel pump rather than replacing it - and that is
what I have done.  Here's how the pump looked on the car.

http://www.aubard.us/MGTD/HPIM1030.JPG

Here's how it looked on the bench with the filter and the fuel chamber
removed.

http://www.aubard.us/MGTD/HPIM1041.JPG

Here's a look at the non-return valve before any cleanup.

http://www.aubard.us/MGTD/HPIM1042.JPG

Here are the valve parts (almost) ready for reassembly.  I say almost
because the valve disks still need to be cleaned.

http://www.aubard.us/MGTD/HPIM1043.JPG

And here's the pump reassembled with new gaskets, the contacts
burnished, and tested.

http://www.aubard.us/MGTD/HPIM1044.JPG

It runs great and looks nice.

>From there I moved on to the next component to rebuild; the starter
switch.  Here's how it looked while still on the car.

http://www.aubard.us/MGTD/HPIM1050.JPG

Same switch on the bench, awaiting cleanup.

http://www.aubard.us/MGTD/HPIM1051.JPG

Some fuel pump debris is still on the bench.  All has since been
cleaned up.  Here's a look at the switch, now cleaned up, refinished
and tested.

http://www.aubard.us/MGTD/HPIM1054.JPG

And finally, a look back at the car with the parts removed.  This
picture is my guide as to the correct placement / orientation of the
various mounting brackets.

http://www.aubard.us/MGTD/HPIM1053.JPG

And that's it for now.  I like sharing the work and I know some of you
probably enjoy seeing the progress.  Please feel free to just hit
'delete' is uninterested.

With kind regards,

-rick
______________________________________________

Mg-t@autox.team.net
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/mg-t/nsurles@aol.com
______________________________________________

Mg-t@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>