[Mg-t] Glaze

mg-t

[Mg-t] Glaze

To:	mg-t@autox.team.net
Subject:	[Mg-t] Glaze
From:	Richard Lindsay <richardolindsay@gmail.com>
Date:	Thu, 18 Jul 2013 09:58:51 -0500
Delivered-to:	mharc@autox.team.net
Delivered-to:	mg-t@autox.team.net

Hello Friends,

Fingers feeling the bores reveal that if the taper and ovality
measurements are within spec, I'll only need to break the glaze on the
cylinder walls with a simple hone, and all will be well.

http://www.aubard.us/MGTD/HPIM1368.JPG

-rick
______________________________________________

Mg-t@autox.team.net
Archive: http://www.team.net/archive

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Mg-t] Glaze, Richard Lindsay <=

Previous by Date:	Re: [Mg-t] Starting on the head, Rick Lindsay
Next by Date:	Re: [Mg-t] Mess, run out of space, Mark J Bradakis
Previous by Thread:	Re: [Mg-t] Starting on the head, " Just Brits " Shop
Next by Thread:	Re: [Mg-t] Mess, run out of space, Mark J Bradakis
Indexes:	[Date] [Thread] [Top] [All Lists]